AC STAGEV WEV-EVCORE-BZK 11 kW EV Charging Station

Read the installation and user instructions before installation or operation.

Installation, commissioning and servicing require appropriately qualified and authorized electrical personnel.

Isolate the mains supply before work, and verify with a tester that the supply conductors are not live.

Use insulated electrical tools and comply with applicable electrical installation requirements.

The charging station must be permanently installed at its designated location.

Do not install, touch or operate a damaged or malfunctioning station, cable or connector.

Avoid explosive atmospheres, flammable substances and locations exposed to water hazards.

Keep the station away from strong electromagnetic fields and nearby radio transmitters.

Route cables to prevent mechanical or thermal damage and keep suitable clearance from heating or moving parts.

Do not dismantle or repair the station yourself; use qualified authorized service personnel.

Check that the supply, vehicle and load parameters are compatible with the station and installation.

The installer must check connections and perform the prescribed functional test before use.

Use the station only for its intended charging purpose and follow the vehicle charging limits.

Keep children and people unaware of the hazards away from the device.

Do not use the station after actual or suspected water exposure.

Unauthorized software modifications and non-original or unauthorized replacement parts are prohibited.

Choose a stable mounting surface and a site protected from weather as far as possible, at least 5 m from water, gas and other explosion hazard zones.

The electrical installation requires protective earthing and the residual-current and circuit protection specified in the installation manual.

Disconnect the supply before cleaning. Use gentle cleaning methods; do not use pressure washers, excessive water, alcohol, solvents or abrasive agents.

Check protective caps and seals regularly. Keep charging contacts free of dirt and moisture; do not apply damp tools or cleaning agents directly to contacts.

Arrange the recommended maintenance checks every 6 to 12 months.

Dispose of the station through a designated electrical-waste collection system, separately from household waste.